hdp
magnification_adjust
mag
Green
Sets the magnification for the original and high resolution modes. Parameter 0
is for low, parameter 1 is for high. Once this magnification parameter has been
changed, it will not take effect until a "scan gen" command is issued or the
recorder is restarted.
The magnification is entered in pixels. The pixel size for each resolution mode
is based on the first mode defined in the mode table for the low and high
resolutions separately. For example, if mode 1 is defined as 2400 DPI low, the
magnification pixel size for low resolution will be 1/2400 inches. However, if
mode 2 is defined as 3200 high, the magnification pixel size for high resolution
will be 1/3200 inches. To avoid confusion, 2400 DPI should be the first high
and low entries in the table, e.g. Mode 1 - 2400 DPI Low, Mode 2 - 2400 DPI High
(or vice versa).
real